Customization: | Available |
---|---|
Phase: | Single Phase |
Type: | On-line |
Still deciding? Get samples of US$ 1058/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MODEL | PlusPRO 1-10KT |
CAPACITY | 10KVA/9KW |
INPUT | |
Phase | 1 Phase 2 Wires with Ground |
Voltage | 220/230/240Vac |
Frequency | 50Hz or 60Hz (Auto-sensing) |
THDi | <5% with R full load |
OUTPUT | |
Phase | 1 Phase 2 Wires with Ground |
Voltage | 220/230/240Vac |
Voltage Regulation | +/-1% |
Frequency (Battery Mode) | 50Hz or 60Hz +/-0.05Hz |
Waveform | Pure Sinewave |
THD | <2% (linear load), <5% (non-linear load) |
Crest Ratio | 3 : 1 |
EFFICIENCY | |
To AC Mode | >92% at full load and battery fully charged |
To Battery Mode | >92% at full load and 12VDC/battery |
To ECO Mode | >96% at full load and battery fully charged |
BATTERY | |
Type | Maintenance free sealed lead-acid battery |
Voltage | 240VDC |
Capacity & Number | 12V/9AH*20pcs |
Recharge Time | 8 hours to 90% |
TRANSFER TIME | |
Line Mode to Battery Mode | 0ms |
Inverter to Bypass | 0ms |
ECO Mode to Inverter | <10ms |
DISPLAY | |
LED Indicator | Normal (Green), Bypass (Yellow), Fault (Red), Battery (Yellow) |
LCD Display | Load level, Battery voltage, Battery mode, AC mode, Bypass mode information |
AUDIBLE ALARM | |
Battery Mode | Beeps Every 4 Seconds |
Low Battery | Sounding Every Second |
Overload | Sounding Twice Every Second |
Fault | Beeping continuously |
COMMUNICATIONS | |
Interface (Port) | USB Port (Dry Contact is optional) |
Intelligent Slot | Yes, but SNMP card is optional |
EPO | Emergency Power Off |
ENVIRONMENT | |
Operating Temperature | 0°C-40°C (32°F-104°F) |
Humidity | 0-95% (Non-condensing) |
Acousitc Noise | <50dB at 1M |
PHYSICAL | |
Main UPS (D*W*H) | 623*192*347mm |
Battery Box with Terminal PDU (D*W*H) | 623*192*347mm |
Battery Box (D*W*H) | 623*192*347mm |